self-drilling screw ngamaphiko
Ukudibanisa iinkuni ngesinyithi, umngxuma emaplangeni uyafuneka kunye nendawo ethile ukunqanda ukuthungelwa, iinkuni phambi kokuba kugqitywe ukugrumba umtya, Indawo yokuZimbela yomba intsimbi ngelixa iingcebiso zamaphiko zenza umngxuma wokuqhambuka xa udlula. Ngentsimbi,Kungenjalo incam ye-drill inokutshiswa, iinkuni, zophuka okanye umtya wokulungisa ungaxutywanga.
Isicelo
1:Omabini amaphiko aphephe ukuba iinkuni zonakaliswe ngokubhoboza umngxuma wokulinga.
Ngeembambo phantsi kwentloko ukuba countersunk iinkuni ngoko nangoko, kunye melamine kunye nezinye
izixhobo.
I-2: I-Fine Thread Self-Drilling Countersunk Winged Screws ifanelekile ngamaplanga, i-fiber cement kunye ne-chipboard kwintsimbi apho kufuneka ukugqiba ukugungxula.
Uphawu
1: Self Drilling Izikrufu ngamaphiko
2:Ugrumba iinkuni.
3:Isixhobo sokhuni + i-drill yentsimbi.
4:Imisonto kwipleyiti yentsimbi
5:Emva kokuthunga iimbambo ezingaphantsi kwe-screw head self-embeds ukwenzela ukugungxulwa okanye ukugqitywa, ukukhupha nawaphi na amasuntswana akhululekileyo xa ubala.
Thabatha la manyathelo okhuseleko
1:Gqoba ngaphambili umngxuma omkhulu kunobubanzi bomsonto.
2:Sebenzisa isikrufu esongezelelekileyo sokuzibhora (esingarhwebiyo).
3:Sebenzisa i-self-drilling screw enamaphiko amabini: i-reamer eyenziwe phezu komthi inobukhulu obukhulu kunomsonto ukuze oku kungachukumisi ukhuni.Amaphiko kunye nentambo iya kuqhawula ukudibana nentsimbi.
Ukuba unombuzo, ufuna isisombululo esisodwa okanye ujonge i-fastener engadweliswanga, nceda uqhagamshelane nathi ngeemfuno zakho.
Inkcazo
| Uphawu | Solidex |
| Uhlobo lweMveliso | self-drilling screw ngamaphiko |
| Izinto eziphathekayo | carbon steel |
| Isimbo sokuQhuba | Self Embedding, amaphiko kunye Phillips #2 okanye #3 Drive |
| Ubude beMveliso | 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-7/16" 1-1/2" 1-5/8" 1-3/4" 1-13/16" 1-7/8" 2" |
| I-Screw Diameter (mm) | 6#/7#/8#/10#/12# |
| Ubude bemisonto | Ngokupheleleyo Umsonto/Inxalenye yomsonto |
| Uhlobo lweNtloko | I-Countersunk/I-Countersunk eneembambo |
| Gqiba | Umbala weZinc/Yellow Zinc/White Zinc/Ruspert/Customized |
| Iklasi yokumelana nokubola | C4 |
| Umgangatho weMveliso | I-GB/DIN7ANSI/BS/JIS |
| Iimvume | CE |
| Ukupakisha | On Iimfuno |
| OEM | Yamkela ukwenziwa ngokwezifiso |
| Isampulu | Mahala |
| Uhlobo losetyenziso olufanelekileyo | Ifanelekile kuNgaphandle/NgaphakathiSebenzisa |
| Supply Ability | IiToni ezili-100 ngosuku |
PHAWULA:
1: Umthamo weDrill: 8g (0.75-2.5mm yentsimbi), 10g (0.75-3.5mm yentsimbi)
2: Uhlobo lomqhubi: Philips P2
3: Isantya soFakelo: 2300-2500 RPM Max Drill Speed
